The current international market, synchronous belt wheel is developing toward high speed and standardization of the two big. Therefore applicable to all types of aircraft product synchronous belt wheel is thus developed. As synchronous belt wheel company on synchronous belt wheel technology research and development towards high efficiency and fine mi degree strong, long service life, development, enterprise production of products is also more and meet the requirements of the international market. Due to the synchronous belt wheel belongs to a partial door machine, many consumers also issuing poorly understood to its use. Synchronous belt wheel company through many years of experience on the use of synchronous belt wheel to make the following analysis. In the use of synchronous belt wheel first check on the money, look inside the machine whether have impurities, and clean up, add some lubricating oil. After the product processing, if appear synchronous belt wheel wear, has replaced immediately synchronous belt. In use process, think error can cause synchronous belt wheel noises, it is to stop using immediately. Check whether any blocked in the machine, as well as product placement is correct. Factors that affect the service life of the synchronous belt wheel are: diyi kind of circumstance is because, workers in the process of synchronous belt wheel repair improper handling. The second is due to the designers during the design process does not operate according to the standard design drawings, material distribution is not uniform, caused by synchronous belt wheel in use deviation with the actual model. Zui after a situation is, not to choose the appropriate synchronous belt wheel installed in the appropriate machine. Its strength can not meet the requirements of machine running. Too much or choose the strength of pulley installed on the smaller power machine, to cause the machine jammed. For the manufacturer, a situation in which satisfy the improvement after only zui standards. Discuss and consider all kinds of matching products of power to create a survey form, according to certain standards in product design, for each molding product label, so as to prevent zui latter situation. Article provided by imported polyurethane synchronous belt manufacturer, reproduced please log on to http://www. lilainuo。 com