The high temperature resistant conveyor belt should be kept clean during use and storage to avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device. During storage, the temperature of the warehouse should be kept between 18-40 ℃, and the relative humidity should be kept between 50-80 ℃. During storage, the conveyor belt must be placed in rolls without folding. During storage, it should be turned once a quarter. Different types and sizes of conveyor belts should not be used together. The joints are best glued. The type, structure, specifications and number of layers of the conveyor belt should be selected according to the conditions of use. The running speed of the conveyor belt is generally not better than 2.5 m / s. Materials with large chunks and large abrasion and fixed discharge devices should use low speed as much as possible. The relationship between the diameter of the driving roller of the conveyor and the cloth layer of the conveyor belt, the matching of the driving roller and the redirecting roller, and the requirements for the idler groove angle should be selected according to the design requirements of the conveyor. The feeding direction should follow the running direction of the high temperature resistant conveyor belt. In order to reduce the impact of the material on the conveyor belt, a chute should be adopted to reduce the distance of the material drop. Missing material. The belt conforms to a soft and moderate baffle plate, so as to prevent the baffle plate from being too hard and scratching the belt surface of the high temperature resistant conveyor belt