Believe that most people know in customized pulley and synchronous belt in addition to need to order manufacturers to provide some related parameters of belt and pulley data, in fact there are many places need to be aware of the. Like to tell you today in order and purchase the need for both. Custom pulley and synchronous belt should start selection of synchronous belt. For tooth profile is standardized, common have millions of torque series of S1. 5 m, S2M, S5M, etc. , and other commonly used machine model of the tooth series, such as MXL. They will provide width of several series such as 3. 2 mm, 4 mm and minimum pulley diameter and number of teeth, the length is more than N chose, because to meet the needs of different work schedule. Custom pulley and synchronous belt is the need to support the use of the first tooth and belt, such as is S2M, if is the number of teeth and pitch diameter, this is also a series, such as MXL with a minimum of 10 teeth tooth, the bar diameter is 6. 47mm。 Can have a variety of series of tooth number selection is also. As for the width is determined by the machine, to see if there is any need to add guard, to prevent the synchronous belt transmission shift. Tooth shape and tooth number decide the size of the synchronous wheel, width is determined by the machine. Section of the belt and synchronous wheel line length is not the same, otherwise the belt is just set on the synchronous wheel.