1. Bearing point: The bearing point is the part of the conveyor belt that is very easy to damage. The speed of the conveyor belt, the size of the material transported by the conveyor belt, the impact force and the direction of the bearing operation are all important factors that should be paid attention to. The loading chute receives The width of the ends should be large enough.
2. Cleaning: The surfaces of all rollers and idlers must be kept clean, and the return roller and buffer roller must be kept clean. The conveyor belt is required to be clean when it enters the return operation. Generally, the scraper is the herringbone cleaner.
3. Roller: Ensure that all rollers rotate flexibly. If there are many attachments on the roller, it will cause the belt to deviate and damage the conveyor belt. Therefore, it should be checked frequently to keep the drum clean.
4. Upper and lower rollers: strictly abide by the roller management and buttering regulations, and replace damaged rollers in time
5. Tensioning device: Check whether the tensioning device can move, the stroke size, and whether the sliding condition of the guide frame is in good condition. Regularly fill in oil, and check the cover plate set in the tensioning device to prevent materials from falling.
6. Conveyor belt: Regularly check the conveyor belt itself and deal with it in time, which is the main measure to prevent accidents and improve the service life of the conveyor belt.