Synchronous belt wheel will encounter problems in the process of running a motor overheating, about what should we do? Small make up to introduce below. 1. If the medium is more than important than configuration of the motor, then can use by installing the appropriate synchronous belt wheel motor to deal with. 2. If is gland pressure to prison or seal spring too tight, so can pass to adjust the volume of the gland or mechanical seal spring compression to deal with. 3. If the pump is equipped with quality is bad, there is friction in existence or motor and pump shaft is not concentric, then can through the checks on the quality of fittings, and remove equipped with failure to deal with. 4. If it is round and the shaft coupling problems, so in the pulley and shaft coupling, by eliminating the transmission clearance to deal with. Above is the processing of synchronous belt wheel motor overheating, hope to help everyone.