Some of the mechanical equipment manufacturers may have this kind of trouble: polyurethane synchronous belt use how long time have not obviously, why can appear damaged? Below by warm-hearted Uliflex jun to give you bring about articles to ensure the service life of the synchronous belt. In the previous article, we all learned that the polyurethane synchronous belt has a life, synchronous belt will have a normal aging process, performance using extended gradually weakened with time belong to normal phenomenon. To some extent, the use of synchronous belt length affects our production cost, so, how to ensure the service life of the synchronous belt to be our production and processing as one of the attention and concern. So are we going to do for the service life of the synchronous belt at ordinary times what work? A, of the three factors affecting the service life of the belt, the first thing to understand is the following factors: 1, or synchronous belt transmission device maintenance; Two of the original design, equipment failure; 3, synchronous belt strength can not meet the requirement of the use. These three factors, any one will influence the service life of the belt. For Uliflex, we can only influence in strengthening the strength of the polyurethane synchronous belt, the other two users need to be improved. Second, the other factors affecting the service life of the belt do not need maintenance polyurethane synchronous belt, and the oil resistant, corrosion resistant, not affected by damp environment. For polyurethane ( PU） Synchronization is so, but for the whole a transmission mechanism is not so, for example: the installation of synchronous belt and pulley is correct; Pulley is installed correctly; Polyurethane synchronous belt whether overload; Synchronous belt tension is too tight, and so on and so forth are is closely related to the service life of the synchronous belt. So, we should from many aspects to eliminate these factors that affect the service life of the belt, in fact, as long as we do the work, on the other hand is also good for equipment. If your belt is always very easy to bad, from the device and check out the reason, you can replace a synchronous belt merchants to cooperate, if the problem remains, so you need to check carefully whether the equipment problems affect the service life of the belt.