Publish Time: 2026-11-14 Origin: Site
The carding machine is the core equipment in the spinning process, and the textile transmission belt is the key component that ensures the stable operation of the cylinder, doffer and rollers. Improper belt selection will easily lead to problems such as slipping, elongation, deviation and belt breakage, which directly cause increased neps, uneven evenness and frequent shutdowns, and push up the production cost of spinning. For the mainstream carding models commonly used in China, including 186, 204K, 228, 1216, 1213, as well as imported Trützschler TC15 and Truetzschler SC8, to select a reliable and compatible textile belt, a comprehensive judgment should be made by combining the model parameters, working condition characteristics and material properties, instead of simply purchasing by dimensions. In the following content, you will gain the experience and insights to select the right industrial belt for your carding machine.
The first step of selection is to clarify the transmission structure of the carding machine and confirm the belt type. There are mainly two types of textile belts used on carding machines: synchronous toothed belts and film-based flat belts. Timing belts are mostly used in parts requiring precise speed fixing such as doffers and feed rollers, to ensure the synchronous rotation speed of all components and eliminate uneven sliver length. Film-based flat belts are often used as the main transmission, withstanding large torque and continuous high-speed operation. The old-type 186 carding machine has a simple transmission structure and stable load, and mostly uses ordinary rubber timing belts or nylon film-based flat belts. For new high-speed carding-units models such as 1216 and TC15, which have higher output and faster linear speed, the requirements for belt dimensional stability and tensile resistance are strict. Polyurethane timing belts reinforced with polyester skeleton or Kevlar and low-elongation composite flat belts are preferred to reduce frequent tension adjustment in the later stage.
The second step is to check the core specifications and parameters to ensure precise dimensional matching. Before procurement, prioritize keeping the old belt, record its length, width, thickness, tooth profile and pitch, and confirm the number of teeth of the pulley and the style of the pulley groove at the same time. For carding machines of the same model, there will be slight differences in the wheel systems of different production batches, so it is extremely error-prone to place an order only based on the equipment model. For timing belts, focus on confirming the tooth profile, with common specifications such as T10, H, XXH. Mismatched tooth profiles will cause tooth skipping and rapid wear at the tooth root. For flat belts, confirm the joint method: endless seamless belts are suitable for high-speed working conditions, while spliced belts are suitable for positions with limited installation space. Even a dimensional error of a few millimeters will cause the belt to deviate and abnormal heating of the bearing.
The third step is to select the material and key performance according to the workshop working conditions, which is the core of durability. The carding workshop has a lot of flying fibers and large humidity fluctuations, so the textile belt must meet three mandatory indicators: anti-static, wear-resistant and low elongation. Nylon film-based belts are moderately priced and suitable for low-speed working conditions of old models, but they are easy to absorb water and elongate in high humidity, requiring frequent tension adjustment. Polyester film-based composite belts have stable dimensions and low elongation, and their anti-static surface layer can reduce cotton fiber adsorption, making them suitable for high-speed carding-units. PU timing belts are wear-resistant and oil-resistant, suitable for workshops with much oil contamination. If the workshop is at high temperature for a long time, special modified HNBR rubber formula should be selected to delay the hardening and cracking of the belt. Meanwhile, the friction coefficient must be uniform and stable, as slipping will directly cause speed loss of the doffer and deteriorate the sliver evenness.
The fourth step is to make differentiated trade-offs based on spinning raw materials and production capacity requirements. For workshops spinning pure cotton with medium and low output, cost can be considered on the premise of ensuring stability. For production lines spinning chemical fibers with high capacity and continuous operation, low-elongation and high-strength skeleton materials must be prioritized to reduce the frequency of shutdown for belt replacement.
Finally, installation and daily maintenance cannot be ignored after model selection. The installation tension of the new belt should be moderate: too tight will aggravate the fatigue of bearings and the belt, while too loose will easily cause slipping. Keep track of the operation in the initial stage, observe the temperature rise, deviation and abnormal noise, and clean the flying fibers on the rollers regularly.
In conclusion, the core logic of selecting textile belts compatible with mainstream carding machines is "determine the type by the machine structure, determine the specification by the pulley parameters, and determine the material by the workshop working conditions". Abandon the extensive procurement idea of only focusing on price and checking the length and width, and include indicators such as synchronization accuracy, anti-static property, low elongation and wear resistance into the selection criteria. In this way, the transmission belt can serve stably for a long time, guarantee the output of the carding process and the quality of finished yarn, and reduce the operation and maintenance loss of the spinning mill.