Polyurethane synchronous belt: why are you so good?

by:Uliflex     2020-11-19
What is a, polyurethane synchronous belt 'casting' your 'body'? Component polyurethane synchronous belt of three parts: polyurethane with back, wire rope ( Or polyester cord) Tensile layer, polyurethane toothed, below is details: ( 1) Polyurethane (pu) bring back. Synchronous belt to adhesive coating on the back of the tensile element, anti-bending of should have good flexibility and fatigue performance, not easy ageing, good oil resistance, wear resistance, on the inner surface of the belt back with proper size Angle grooves, except for the technological requirements, also can improve the tooth curve bending fatigue performance, at the same time in the process of running between the belt and the tooth intercepting air escape, to eliminate some noise. ( 2) Wire rope ( Or polyester cord) Tensile layer. Tensile layer is the synchronous belt tensile element, is used to transfer the power, and ensure the synchronous belt in the work time from the same. It USES multiple strands wire rope ( Or polyester cord) Along the belt width helical winding cloth, its position as the synchronous belt pitch line. Tensile layer must have a high tensile strength and bending fatigue strength. Elastic modulus, elongation is not permitted at work, so as to guarantee the synchronous belt pitch the same. ( 3) Pu toothed. Polyurethane synchronous belt tooth should have high shear strength, good abrasion resistance and oil resistance. Tooth pitch distribution requirements is very high, toothed should with the correct mesh with tooth slot, so the correctness of the geometric parameters of toothed must have strict requirements. Polyurethane synchronous belt is famous for its excellent oil resistance, abrasion resistance performance, it is applicable to small and medium power of high-speed operation situation, the environment should be dry, the working temperature is commonly - 20~+80 C。 Second, polyurethane synchronous belt is what allows you to 'stand out'? Uliflex polyurethane ( PU) Synchronous belt made of imported thermoplastic polyurethane materials, has a high wear ability, various types of steel wire core to ensure they are still in the high speed transmission keep good athletic ability, the production of small tolerance. During production on the tooth face or back to add a layer of nylon impregnated fabric to ensure running particularity in special applications still remains the same, can also be on the back of the belt thickening polyurethane to prevent corrosion or high load. Synchronous belt, the wheels is a kind of transmission device, it is widely used in many mechanical equipment. While polyurethane synchronous belt is widely used in synchronous belt drive, wheel, because the polyurethane synchronous belt can achieve good transmission effect, can give full play to the transmission device of the advantages. Uliflex polyurethane synchronous belt has the following characteristic: good abrasion resistance, free maintenance, high efficiency, Can be up to 98%) , environmental protection, low noise, energy saving, in - 5 ℃ to + 80 ℃ can run normally, not affected by damp, uv and ozone, good oil resistance, and corrosion resistance. Polyurethane synchronous belt is good quality, determines its status in the synchronous belt transmission. So excellent polyurethane synchronous belt you also don't hurry to find guangzhou Uliflex again carefully understand it!
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...