The latest high temperature resistant conveyor belt product standards stipulate some methods for preparing vulcanized rubber or thermoplastic rubber samples when performing other rubber physical test standards, as well as the measurement of heat resistant belt samples and product sizes for testing, and the thickness should conform to the relevant test methods It is stipulated that unless technically considering the test sample must use other thickness, it is recommended that all samples prepared with special molded film in the test use the following thickness, 2 ± 0.2mm, 4 ± 0.2mm is appropriate, the thickness should be according to GB / T 5723 Method to measure.
The high temperature resistant conveyor belt is mainly used in metallurgy, construction and other industries to transport high temperature materials such as sinter, coke, cement clinker, etc. The temperature of the material does not exceed 800 ℃, and the temperature of the belt surface does not exceed 220 ℃.
High temperature resistant conveyor belt characteristics: EPDM rubber is used as the cover layer, and the skeleton material is domestic high temperature resistant canvas. The unique formula design solves the problem of high saturation, poor adhesion, and low adhesion between layers due to the high saturation of ethylene propylene rubber Key issues.
High temperature resistant conveyor belt has the characteristics of light belt, long life (about 2-4 times) and good heat resistance.