Precautions, maintenance and troubleshooting methods

by:Uliflex     2020-07-08
  Conveyor belt should pay attention to matters   With the popularization of conveyor belts in industrial production, multiple varieties, high performance, light weight, multi-function, and long life are the aspects that manufacturers pay attention to. In industrial production, the correct use of conveyor belts is particularly important, and the following items should be noted in use:  1. Prevent conveyor belt load start;    2. If the conveyor belt deviates, timely measures should be taken to correct it;    3. Avoid the roller covered by the material, causing the rotation to fail, prevent the leakage of material from being caught between the roller and the tape, pay attention to the lubrication of the moving part of the conveyor belt, but not to oil the conveyor belt;   4 Avoid the conveyor belt from being blocked by racks, pillars or massive materials, and prevent them from being broken.    5. When it is found that the conveyor belt is partially damaged, it should be repaired in time with artificial cotton to avoid expansion;   Conveyor belt maintenance   1 When the conveyor belt is stored, the warehouse temperature should be kept between 18-40 ℃, and the relative humidity should be kept between 50-80%.   2 During storage of the conveyor belt, the product must be placed in rolls without folding, and the conveyor belt should be turned quarterly.   3 During transportation and storage, the conveyor belt should be kept clean to avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and one meter away from the heating device.   4 The type, structure, specifications and number of layers of the conveyor belt should be selected according to the conditions of use.   5 Conveyor belts of different types and specifications should not be used together, and the joints are preferably glued.   6 The relationship between the diameter of the driving roller of the roller conveyor and the cloth layer of the conveyor belt, the matching of the driving roller and the redirecting roller, and the requirements for the idler groove angle should be selected reasonably according to the design regulations of the conveyor 7 The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact of the material on the conveyor belt, a chute should be used to reduce the distance of the material falling; the receiving section of the conveyor belt should be shortened and the buffer roller should be used as a leak Material and conveyor belt should adopt soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.   8 The running speed of the conveyor belt should generally not be greater than 2.5m/s. Materials with large lump and large abrasion and unloading devices using fixed pears should use low speeds as much as possible.   Conveyor belt fault solution The deviation of the conveyor belt is the most common failure of the belt conveyor. If the conveyor belt is not processed in time, the deviation of the conveyor belt will cause the conveyor belt to violently rub against the frame. The edges of the conveyor belt will be roughened or even torn, which will not only affect the life of the conveyor belt. , At the same time, it is also easy to spread material outwards, affecting civilized production. When the running deviation is serious, the conveyor belt will fall off the idler and cause a major downtime accident. Therefore, in the installation, commissioning, operation and maintenance of the belt conveyor, special attention should be paid to the running state of the conveyor belt to prevent the conveyor belt from running. Partially caused an accident.   The deviation of the conveyor belt refers to the phenomenon that the center line of the conveyor belt is inconsistent with the center line of the conveyor during the operation of the conveyor, and it is biased to one side.    1 The axis of the idler is not perpendicular to the center line of the conveyor belt.   2 The strength of the connection between the frame and the ground is not enough, and the frame is unstable.   3 The cause of the deviation of the conveyor belt The basic cause of the deviation of the conveyor belt is caused by the imbalance of the lateral force during the operation of the conveyor belt.    4 The guide baffle of the material guide groove and the discharge groove is installed improperly and the force is uneven.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...