Under what circumstances will the timing belt be damaged

1 too much tension: The tension of the timing belt is too great, and the deformation is more serious, which will reduce the service life of the timing belt. 2 Not enough tension: If the tensioning force is not enough, the frictional force will not be enough, and then the slippage will occur, which will increase the wear of the timing belt, let other lose the ability to transmit the load, and the transmission instability will make the belt transmission ineffective. 3 The timing pulley is not aligned: If the synchronous pulley is not aligned, it will cause the synchronous belt to slip, twist and generate heat and wear inside, so the synchronous pulley must be aligned. 4 The length of the timing belt is not equal: If the length of a row of belts is not equal, the tension of each timing belt will also be different, and some will produce slippage or too much tension, causing the timing belt to wear. Therefore, be sure to use the same type of timing belt when using it. 5 There is debris left on the timing belt: If grease or other dirt is left on the timing belt, because the dirt contains chemical substances, it can enter the timing belt and destroy its material structure. 6 If the timing belt is placed for too long, it will cause the rubber to age and reduce its life. 7 If the environment of the application site contains dust, acid or alkali gas or other gases that will damage the timing belt, it will also shorten the service life of the timing belt. 8 If the timing belt has not been operated for a long time, it needs to be removed, otherwise it will reduce the service life of the timing belt and cause the timing belt to deform. 9 Start overload: Running the synchronous belt under overload will generate too much tension, causing the synchronous belt to break due to sliding. 10 The groove of the timing belt wheel is worn: The synchronous belt wheel has been used for too long, the wear of the groove edge is increased, and the angle is incorrect. The synchronous belt will hit the bottom of the groove. To drive the machine, it must increase the tension and cause the triangle belt to be damaged. 11 Vibration amplitude is too large: If the timing belt twitches quickly due to machine vibrations, it will cause the timing belt to be severely sunburned, thereby reducing the service life.