When cleaning PVC conveyor belt, please pay attention to the following points:
1. Turn off the steam valve and adjust the pressure according to the position of the tensioning device.
2. For electromechanical equipment, wrap it with plastic.
3. Connect the device. Connect the washing machine to 220v AC.
4. Wet the conveyor belt. (The purpose of this is to allow the conveyor belt to better absorb the cleaning solution and clean more.
5. Mix the cleaning solution with water at a ratio of 1:10 and stir evenly.
6. Spray the cleaning solution evenly on the conveyor belt with a punch gun. Pay attention to the reinforced edge of the conveyor belt, do not use excessive impact force, so as not to damage the conveyor belt. The gun should be swept at once, and do not repeat flushing.
7. Rinse with clean water. Be careful at this time, so that the cleaning of the PVC conveyor belt will be clean.