In belt use what problems exist in the process of solution
Home » News » ai article » In belt use what problems exist in the process of solution

In belt use what problems exist in the process of solution

Views: 0     Author: Uliflex     Publish Time: 2020-11-30      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Common problem: 1, 2, with abnormal wear belt tooth broken 3, 4 of tooth edge belt use serious wear, belt running deviation, belt longitudinal solutions: 1, do not kink belt, wide belt or big pulley installation, increase the pulley diameter or width of the belt, removal of foreign body, correct tension. 2, correct tension, installation width greater, higher power transmission belt/increase the size of the belt and pulley size, check the belt type, replace if necessary. 3, replace the belt wheel. 4, re-align axis, replace belt wheel flange, reinforcement bearing or chassis. Re-align with 5, change the flange pulley wheel/shaft, correct tension, removal and installation of protective cover, check the cutting device and guide.

Related News

Copyright © 2021 Foshan Uliflex Transmission Technology Co,. LTD. Technology by LeadongSitemap.